Transition Metal Doping Induces Ti3+ to Promote the Performance of SrTiO3@TiO2 Visible Light Photocatalytic Reduction of CO2 to Prepare C1 Product.

Transition metal Fe, Co, Ni and Cu doped strontium titanate-rich SrTiO₃@TiO₂ (STO@T) materials were prepared by hydrothermal method. The prepared doped materials exhibit better photocatalytic CO₂ reduction to CH₄ ability under visible light conditions. Among them, Fe-doped and undoped SrTiO₃@TiO₂ under visible light conditions CO₂ reduction products only CO, while M-STO@T (M=Co, Ni, Cu) samples converted CO₂ to CH₄. The average methane yield of Ni-doped STO@T samples are as high as 73.85 μmol g⁻¹ h⁻¹. The production of methane is mainly due to the increase in the response of the doped samples to visible light. And the increase in the separation rate of photogenerated electrons and holes and the efficiency of electron transport caused by the generation of impurity levels. The impurity level caused by Ti³⁺ plays an important role in the production of methane by CO₂ visible light reduction. Ni doping effectively improves the photocatalytic performance of STO@T and CO₂ reduction mechanism were explained.     

3.0T MRI检查结合X线钼靶诊断乳腺恶性肿瘤的研究

本研究探讨3.0T磁共振成像(MRI)结合X线钼靶诊断乳腺恶性肿瘤的价值。采用回顾性研究方法,选取乳腺肿块患者110例162个病灶,给予3.0T MRI及X线钼靶检查。经病理确诊为恶性病变101个;恶性病灶形态不规则、边缘毛刺、时间-信号强度曲线(TIC)类型Ⅲ型和早期增强率≥60%比例明显高于良性病灶(P<0.05),而分叶状比例和表观扩散系数(ADC)值明显低于良性病变(P<0.05);恶性病变X线钼靶表现:形态不规则、钙化、结构不对称和大导管征比例明显高于良性病变(P<0.05);MRI联合X线钼靶诊断乳腺恶性病变的灵敏性、准确性和阴性预测值明显高于MRI诊断(P<0.05)。3.0T MRI检查结合X线钼靶诊断乳腺恶性肿瘤有较好的价值。     

Modulating Charge Carrier Efficient Separation Enabled by Lewis Base Modification in Paper-based Photoelectrochemical Sensor

The separation efficiency of charge carriers determines the analytical sensitivity of the paper-based photoelectrochemical sensor. Herein, the Lewis base modification strategy is proposed to promote the carrier separation through an in-situ ion exchange method. Firstly, three-dimensional paper-based hierarchically TiO₂ (PHT) arrays are prepared with the one-step hydrothermal method. With the aid of Lewis base, the photo-induced charge separation efficiency and the photocurrent signal are obviously increased. Ultimately, sensitive sensing of prostate specific antigen (PSA) is achieved and the linear range is 1 pg/mL–100 ng/mL with the detection limitation of 0.3 pg/mL.     

分子刚度对膜锚定受体-配体结合动力学影响的理论与模拟研究

人体内大部分生物学过程都离不开细胞黏附.细胞黏附行为主要由锚定于细胞膜上的特异性分子（又称受体和配体）的结合动力学关系来决定.已有研究表明，特异性分子的结合关系受外力及细胞膜波动等多种因素影响.然而，特异性分子刚度对细胞膜锚定受体 配体结合关系的影响机制仍不清楚.近期关于新冠病毒强传染力的研究表明，特异性黏附分子刚度对病毒与细胞结合具有重要影响.该文通过建立生物膜黏附的粗粒度模型，借助分子模拟和理论分析来研究分子刚度在黏附中的作用.结果表明，始终存在一个最佳膜间距及最佳分子刚度值，使得黏附分子亲和力和结合动力学参数达到最大值.这项研究不仅能加深人们对细胞黏附的认知，还有助于指导药物设计、疫苗研发等.     

基于SEIR模型的COVID-19疫情防控效果评估和预测

通过对COVID-19疫情在中国的传播情况进行分析，建立了一个SEIR流行病模型，模型中将确诊人群分成已收治和未收治两类.先从理论上分析了模型的无病平衡点及其稳定性、基本再生数等关键问题；再结合实际数据，对武汉封城前和封城后两个阶段疫情的发展趋势进行数值模拟和比较分析，讨论了模型中一些重要参数对确诊人数的影响；最后，针对上述理论分析和数值模拟的结果，对之前采取的一些控制策略作了分析评估，同时对疫情后期发展进行预测.     

Ultrahigh Loading Copper Single Atom Catalyst for Palladium-free Wacker Oxidation

Wacker oxidation is an industry-adopted process to transform olefins into value-added epoxides and carbonyls. However, traditional Wacker oxidation involves the use of homogeneous palladium and copper catalysts for the olefin addition and reductive elimination. Here, we demonstrated an ultrahigh loading Cu single atom catalyst(14% Cu, mass fraction) for the palladium-free Wacker oxidation of 4-vinylanisole into the corresponding ketone with N-methylhydroxylamine hydrochloride as an additive under mild conditions. Mechanistic studies by ¹⁸O and deuterium isotope labelling revealed a hydrogen shift mechanism in this palladium-free process using N-methylhydroxylamine hydrochloride as the oxygen source. The reaction scope can be further extended to Kucherov oxidation. Our study paves the way to replace noble metal catalysts in the traditional homogeneous processes with single atom catalysts.     

The Coordination Chemistry of f-Block Elements in Molten Salts

The coordination chemistry of f-block elements (lanthanide and actinide) in molten salts has become a resounding topic in view of its great importance to the research and development (R&D) of molten salt reactors and pyroprocessing. In this Review article, a general overview of the coordination chemistry of f-block elements in molten salts is provided including past achievements and recent advances. Particular emphases are placed on the oxidation state, speciation, and solution structure of f-block metal ions in molten salts, as well as their relationships with the salt composition. Furthermore, this review briefly discusses the spectroscopic and theoretical methods that complement each other in revealing the coordination properties.     

Revealing the Effect of Surface Composition on Multiwalled Carbon Nanotubes Supported Pt-Fe Alloy Electrocatalysts for Methanol Oxidation Performance

The designs of efficient and inexpensive Pt-based catalysts for methanol oxidation reaction (MOR) are essential to boost the commercialization of direct methanol fuel cells. Here, the highly catalytic performance PtFe alloys supported on multiwalled carbon nanotubes (MWCNTs) decorating nitrogen-doped carbon (NC) have been successfully prepared via co-engineering of the surface composition and electronic structure. The Pt₁Fe₃@NC/MWCNTs catalyst with moderate Fe³⁺ feeding content (0.86 mA/mg_Pt) exhibits 2.26-fold enhancement in MOR mass activity compared to pristine Pt/C catalyst (0.38 mA/mg_Pt). Furthermore, the CO oxidation initial potential of Pt₁Fe₃@NC/MWCNTs catalyst is lower relative to Pt/C catalyst (0.71 V and 0.80 V). Benefited from the optimal surface compositions, the anti-corrosion ability of MWCNT, strong electron interaction between PtFe alloys and MWCNTs and the N-doped carbon (NC) layer, the Pt₁Fe₃@NC/MWCNTs catalyst presents an improved MOR performance and anti-CO poisoning ability. This study would open up new perspective for designing efficient electrocatalysts for the DMFCs field.